Just ONE Needle is Shredding Let’s check the tension on that needle. Remember, this is the most common cause of thread shredding. Watch the video and adjust your tension on that needle according to instructions. Keep this page open while you adjust your tension...
All Needles are Shredding – Let’s Check the Hooping Sometimes you get shredding on all or more than one needle because of improper hooping. Before we go any further, please review the Hooping training video. MAKE SURE IT’S HOOPED TIGHTLY! Keep this...
Shredding Thread This is a common problem and very simple to fix. Normally, it’s due to improper tensions on that same needle, but let’s go through a few of the troubleshooting steps below to make sure, and then get your machine up and running again....
Shredding Thread but NOT on all Designs You may have a Design or Digitizing issue. If only 1 or just a few designs are not sewing out correctly you probably need to check your design. Here’s what to look for: Density of Underlay Pull Compensation Stitch Length...
